Getting started – Rolodex RF-2064 User Manual

Page 4

Advertising
background image

Getting Started

Before you can use your organizer for the first
time, you must remove the battery insulation
tape from your organizer.

1. Turn your organizer over.
2. Carefully pull the battery insulation tape

out of the battery compartment.
Note: You may have to reset your organizer
by using a paperclip to

gently press the Re-

set button, located on the back. Press Y to
start the reset and display

DEL SECRET?.

To reset only your secret memory, press Y.
To reset your entire organizer, press N when
DEL SECRET? is displayed, and then press
Y when

ERASE DATA? is displayed.

Warning! Resetting your organizer erases all
stored data. Only perform a reset if you do not
need the data currently stored in your organizer.

To Use the Backlight

Your organizer has a backlight to illuminate
the screen at night or in other low-light
conditions. To turn the backlight on, first
turn on your organizer and then press

.

The backlight will stay on for as long as
you press the keys and will turn off auto-
matically 20 seconds after your last key-
stroke. To turn the backlight off, press

.

3

Advertising