Roland Ronald Wireless DP90S - Manual (Page 2)

About the Wireless LAN Function
2
Wireless LAN Function Settings
You can view or edit the wireless settings.
Basic Operation
1.
While holding down the [Key Touch] button, press the
[Transpose] button.
2.
Press the [ ] [ ] (Slow/Fast) buttons to select the
“Wireless,” then press the [Song] button.
3.
Press the [ ] [ ] (Slow/Fast) buttons to select menu,
then press the [Song] button.
Menu Explanation
Status This shows the wireless LAN status.
Connect Connect to a wireless LAN access point.
Option Make settings for Wireless ID or Ad-Hoc mode (p. 3).
In the explanations that follow, procedures will be indicated
using arrows, like this: “Wireless” g “Status.”
Status Indication
This shows the wireless LAN status.
1.
Select “Wireless” g “Status.”
The status screen will appear.
Display Explanation
Signal level:
Strong
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The identifier (name) of the connected wireless LAN
access point is shown.
Signal level:
Middle
Signal level:
Weak
Not Con
The wireless USB adapter is inserted, but not
connected to a wireless LAN access point.
NotAvail The wireless USB adapter is not inserted.
DP90S/90
SSID
Ad-Hoc mode (p. 3).
The Ad-Hoc SSID is shown. Press the [
] (Fast) button
to display the Ad-Hoc key.
For details, refer to “Connecting in Ad-Hoc mode” (p. 3).
2.
Press the [ ] (Fast) button to display the IP address.
Connecting to a Wireless LAN Access Point
That You Select (Select AP)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1.
Select “Wireless” g”Connect” g “Select AP,” then press the
[Song] button.
The Select Access Point screen will appear.
• An “*” symbol is shown for the currently-connected wireless LAN
access point.
2.
Press the [–] [+] button to choose the wireless LAN access
point to which you want to connect, and press the [Song]
button.
• You will be connected to the selected wireless LAN access point.
• If you’re using this wireless LAN access point for the first time,
you’ll proceed to the authorization (PASS) screen.
• If this is a wireless LAN access point to which you have connected
in the past, just press the [Song] button and you’ll be connected.
Once successfully connected, “Success” will appear.
Authorization screen (PASS)
3.
Enter the security code (passphrase) of your wireless LAN
access point, and press the [Song] button.
How to enter characters
Use the [ ] [ ] (Slow/Fast) buttons to select the position at
which you want to specify a character. Use the [–] [+] buttons to
change the character.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, “Success” will appear.
* If you fail to connect, refer to “Troubleshooting” (p. 4).
4.
Press the [Key Touch] or [Transpose] button to exit
Function mode.