Chapter 11, 4 quad display operation – Rackmount Solutions CYBER VIEW RP-817QD User Manual
Page 40
11.4 Quad Display Operation
Chapter 11
P.36
5
4
2
VCR
button (#2)
Quad
button (#4)
CH Select
button (#5)
Function
ON
ON
OFF
Display quad video signal from VCR tape
ON
OFF
Push Once
Call up specifi c quadrant from tape in full screen mode
ON
OFF
Push Twice
Freeze specifi c quadrant from tape in full screen mode
OFF
X
X
Exit VCR operation and back to normal operation mode
3
Sequ.: Push this button to enable full page auto sequencing mode. Push this button again to disable it..
VCR: Push this button to enter into VCR Playback/Zoom operation. In this mode, the output video is displaying the
video signal from VCR. When operated in Full Screen display mode, push select buttons (#5) to zoom any specifi c
camera signal pre-recorded on the tape in quad format. Push the select button (#5) again to freeze the expanded
picture on the screen.
Setup buttons (#1, #2)
Function
CH Select buttons (#5)
UP, DOWN
< , >
Push once
Page 1 menu for time / date / title programming
Text Selection
Cursor Control
Push twice
Page 2 menu for alarm confi guration
Text Selection
Cursor Control
Push the third time
Save the settings
Yes / No
Push the fourth time
Exit setup mode, back to norrnal
#1, #2 Setup buttons: Push these two buttons simultaneously to get into Menu Setup mode and display page 1 of
system setup menu. Push these two buttons simultaneously again to display page 2 of the setup menu. Use page 1
to program time/date and camera title and page 2 to confi gure alarm operations. Under menu setup mode, Channel
Select buttons (#5) are used for cursor control and text selection to program the setup menu. Push the setup but-
tons simultaneously again to save the setting. Push the setup buttons fourth time to get back to ordinary operation
mode.
: Push this button to switch between Quad/ Full Screen display mode.
buttons: When operated in Quad mode, these buttons are used to freeze any specifi c camera
by pushing the corresponding button. When operated in Full Screen display mode, these buttons are used to select
specifi c camera to be displayed in full screen.
Quad button (#4)
Channel Select buttons (#5)
Function
ON
ON
Freeze specifi c camera video in Quad screen mode
OFF
ON
Call up specifi c camera video in full screen mode
These buttons are also used as cursor control and text select keys under Setup menu mode.
4
2
1
3
5
Lock: Security locks out button. Push this button for 2 seconds to enable control panel lock out function. Push this
button again for 2 seconds to disable the function.
1
Setup
VCR
SEQ
<
<
<
>
Quad Display Control