Rosen Entertainment Systems M10 - Manual (Page 11)

11
Rosen Entertainment Systems
BASIC REMOTE CONTROL BUTTONS
1 Open/ Optional Source Unit Power
Pressing this button when the screen is closed will deploy the
screen. This button also turns on some optional Rosen source units.
(There is also an OPEN button on the front control panel.)
Note: The M10 turns on when the screen opens.
4 Play
Press to begin or resume playback of a DVD in a Rosen DVD Player.
Note: When the disc is first inserted, you may have to press
PLAY or ENTER to begin playback.
3 Stop
Press once to temporarily stop playback of a Rosen DVD Player. To
resume normal playback from the same point, press PLAY.
To play the disc from the beginning, press STOP twice, then PLAY.
Note: Once STOP is pressed twice, the player can only begin
playing from the beginning of the disc.
16 Eject
Press to eject a DVD or CD from a Rosen DVD Player. After a disc is
ejected, “OPEN” is displayed on the screen.
2 Pause/Frame Step
Press once to pause playback of a Rosen DVD Player. Press
repeatedly to advance video frame by frame. To resume normal
playback, press PLAY.
5 Previous Chapter/Track
Press to jump to the previous title or chapter, if available on a DVD, or
to the previous track on an audio CD. (Rosen source units only).
8 Next Chapter/Track
Press to jump to the next title or chapter, if available on a DVD, or to
the next track on an audio CD. (Rosen source units only)
6 Reverse
Press to search in reverse. To resume normal playback, press PLAY.
(Rosen source units only)
7 Forward/Search
Press during playback to fast forward. Press the RIGHT and LEFT
arrow buttons to adjust search direction and speed. Choose from 2x,
4x, 6x, and 8x. Press PLAY to resume regular play. Rosen DVDs only.
25 Day/Night
This button decreases display brightness for optimum viewing in low
light conditions. The M10 system also has an automatic dimming
feature which dims display brightness automatically whenever the
headlights are on (this feature is not compatible with all vehicles).
Using the Day/Night button temporarily overrides the M10’s auto-
dimming feature - it re-activates the next time you start the vehicle.
Set the Brightness level in daytime conditions with plenty of ambient
light, and with the headlights off. Then the auto-dimming feature will
dim the screen automatically at night, or you can use this button to
switch between Day and Night modes. (See Page 10.)
EJECT