RedMax BM40S - Manual (Page 3)

US-3
BM40S
U
S
1. Parts location 4. For safe operation
2. Specifications
1. Tank
2. Pump
3. Lid (cap)
4. Shoulder Strap
5. Hose
6. Wand
7. Nozzle,
Spray Tip Set
1
2
4
5
6
7
3
Type ············································································ Back Pack
Model Name······································································ BM40S
Dimensions (LxWxH) ······························· 530x360x210 (20.9x14.2x8.3) mm (in)
Dry Weight················································································ 5.2 (10.4) kg (lbs)
Tank Capacity······································································· 15.1 (4.0) litter (Gal)
Max. Pressure ·································································· 10.5 (150) kgf/cm 2 (psi)
Working Pressure·············································· 1.05 – 5.6 (15 – 80) kgf/cm 2 (psi)
Sealed/O rings·················································································· VITON/Nytril
Pump Type ·································································· External Sealed Piston
Reparability······················································································ YES
Tank Mouth ······································································································· 6"
Wand Type···························································································· 20" Brass
Standard Nozzle ···························································· Adjustable Brass Nozzle
3. Warning labels on the machine
If warning label peel off or become soiled and impossible to read,
you should contact the dealer from which you purchased the
product to order new labels and affix them in the required
location(s).
Never modify your machine.
We won't warrant the machine, if you use the remodeled
machine or you don't observe the proper usage written in the
manual.
WARNING
IMPORTANT
1. Read this Sprayer Owner/Operator
Manual carefully. Be sure you
understand how to operate this unit
properly before you use it. Failure to
do so could result in serious injury.
2. Be sure to keep this manual handy
so that you may refer to it later
whenever any questions arise. Also
note that you are requested to
contact the dealer from whom you
purchased the product for assistance
the event that you have any
questions which cannot be answered
herein.
3. Always be sure to include this
manual when selling, lending, or
otherwise transferring the ownership
of this product.
4. Do not lend or rent your machine
without the owner's manual.
5. Be sure that anyone using your unit
understands the information
contained in this manual.
6. Never let a child under 13 years old
use the machine.
7. DO NOT use flammables in the
sprayer. They can ignite ore xplode
causing serious injury.
8. Always wear splash goggles and
protective gear and clothing when
filling, using and/or cleaning the
sprayer.
9. Oil the rubber cap gasket prior to
first usage so the gasket will seal
properly.
10.Tighten all connections before using
the sprayer. Some may not he
properly secured and must be
tightened to prevent leakage.
BEFORE USING:
Oil cap gasket, oil check valve, and
maintain breather hole clear of debris.
Your failure to oil and to clean check
valve, and to maintain breather hole
open to allow air into tank, can cause
tank to collapse and crack due to
vacuum created by the pump.
WARNING
WARNING
Tank shape is a Trademark of SP Systems LC /Swissmex