Remote Technologies IR-PRO T3 - Manual (Page 13)

T3 Universal System Controller
6
often. Since the T3 can safely be charged after each use, a docking
station is included for convenience. If left out of the docking
station, the T3 will remain in sleep mode for 1 – 2 months before
shutting down. At that point the battery must be recharged.
The T3 Docking Station can be placed on a flat surface such as a
shelf or table, or it can be mounted to a wall using the mounting
holes on the back of the unit.
If the T3 battery capacity is reduced to approximately 25 percent,
a low battery icon will appear in the top center of the display:
The low battery icon will change color to red if the battery
capacity becomes critically low:
At this point the T3 must be placed into the docking station to
recharge the battery.
The docking station LED illuminates to indicate a charge in
progress. The LED will turn off when the battery in the unit is
fully charged.
A fully discharged battery will take approximately 2-4 hours to
completely re-charge.
The T3 can remain in the docking station indefinitely without
damage to the battery.