Runco PLASMAWALL SP-60DHD / SP-60DHDXA - Manual (Page 40)

Installation
30 PlasmaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Cable Management To minimize cable clutter, you can use the cable ties provided with the PlasmaWall to
bundle the video, control and power cables at the back of the display. Install the cable ties
as shown in Figure 3-11. Cables can be routed to the right or left.
Figure 3-11. Installing the Cable Ties
➤
Do not allow excessive stress to be placed on the ends of cables.
Note
* As viewed from the rear of the display.