Runco PLASMAWALL SP-60DHD / SP-60DHDXA - Manual (Page 69)

PlasmaWall SP Series Owner’s Operating Manual 59
PRE
L
IMINAR
Y
7.1
PlasmaWall
Specifications Table 7-1 lists the PlasmaWall specifications.
7. Specifications
Table 7-1. PlasmaWall Specifications
Native Resolution: Model SP-42DHD: 1024 x 768
Model SP-50DHD: 1365 x 768
Model SP-60DHD: 1365 x 768
Screen Size (diagonal): Model SP-42DHD: 42 in.
Model SP-50DHD: 50 in.
Model SP-60DHD: 60 in.
Active Screen Area: Model SP-42DHD: 36.28 x 20.29 in. (921.6 x 515.3 mm)
Model SP-50DHD: 43.45 x 28.98 in. (1103.6 x 736.0 mm)
Model SP-60DHD: 51.93 x 29.21 in. (1319.0 x 741.9 mm)
Screen Aspect Ratio: 16:9
Available Aspect Ratios: Refer to Table 7-2
DTV Compatibility: 480p, 720p, 1080i
Contrast Ratio: 1000:1
ISF Settings: Yes
Data/Graphics Compatibility: Refer to Table 7-3
Inputs (from DHD Controller): (1) DVI 1.0 with HDCP
(1) RGB/Component (15-pin D-sub)
(1) RS-232 (9-pin, D-sub male)
Outputs: (1) RGB (15-pin D-sub)
Power Requirements: 100 to 240 VAC, 50/60Hz
Power Consumption: Model SP-42DHD:
360 watts (1.5 watts in standby), maximum
Model SP-50DHD:
377 watts (10 watts in standby), maximum
Model SP-60DHD:
475 watts (10 watts in standby), maximum
Operating Environment: 40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing)
Altitude = up to 9,000 feet/2,740m MSL (Models
SP-42DHDxa, SP-50DHDxa and SP-60DHDxa only)
Dimensions: Model SP-42DHD: See Figure 7-1
Model SP-50DHD: See Figure 7-2
Model SP-60DHD: See Figure 7-3
Weight (with Stand): Model SP-42DHD: 83.0 lbs. (37.65 kg)
Model SP-50DHD: 94.2 lbs. (42.73 kg)
Model SP-60DHD: 150.5 lbs. (68.27 kg)