Radio Shack 15-2143 - Manual (Page 9)

17 16
To Operate:
1. Press the TV, VCR/DVD, or SAT/
CBL button (depending on which
product you want to operate).
2. Point the remote towards the
product and press POWER to turn
on the product.
4. Use the other buttons to operate
the features of your product.
After the batteries are installed and you have
programmed the remote for the codes that operate your
products, you can use your remote to operate a TV, VCR,
DVD Player, Cable Box, or Satellite System, etc.
TV (Press TV First)
VCR
(Press VCR/DVD First) DVD Player
(Press VCR/DVD first)
Product Operation
Satellite System
(Press SAT/CBL first)
Frequently Asked Questions
Remote does not operate your product.
• Press the mode button of the product you want to
control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
• Remote may not be compatible with your product.
Remote does not operate some features of your product.
• Program remote with a new code.
• Remote may not be able to operate all features of
your product or button names might be different
than your product.
Red Indicator blinks after you program a product code.
• Remote did not accept the code.
• Try to program the code again or try a different
code.
Cable Box
(Press SAT/CBL first)