Rosewill RXS-4324 - Manual (Page 34)

Internet Camera RXS-3323/RXS-4324 User Manual
1. RTSP Port: Choose the RTSP port. The RTSP protocol allows a connecting client to start a video
stream. Enter the RTSP port number to use. The default value is 554.
2. RTP Port: Specify the range of transmission port number of video stream. The default range is
50000 to 50999. User can specify a number between 1024 and 65535.
UPnP:
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Network Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be added to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic
to an external HTTP port in the NAT router will be forwarded to the device.
34