Rosewill RXS-4324 - Manual (Page 42)

Internet Camera RXS-3323/RXS-4324 User Manual
4. NTP Server: Type the host name or IP address or domain name of the NTP server.
5. NTP Sync. Interval: Select an interval between 1 and 23 hours at which you want to adjust the device’s time
referring to NTP server
6. Time zone: Set the time difference from Greenwich Mean Time in the area where the device is
installed.
7. Daylight Saving: Disable or enable the daylight saving adjustment.
Maintenance
1. Hard Factory
Default (Include the
network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
2. Factory Default
(Except the network
setting):
The unit is restarted and most current settings are reset to factory default values. This
action will not reset the network setting.
3. Backup Setting: To take a backup of all of the parameters, click this button. If necessary, it will then be
possible to return to the previous settings, if settings are changed and there is unexpected
behavior.
4. Restore Setting: Click the “Browse” button to locate the saved backup file and then click the “Restore
Setting” button. The settings will be restored to the previous configuration.
42