Deleting a sample – Roland SP-404SX User Manual
Page 21
21
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
Deleting a Sample
If you are not satisfi ed with the sound you sampled, use the following procedure to delete it, and then sample the sound again .
1. Press.the.[.DEL].button .
2. The.display.will.indicate.“
d E L
,”.and.the.pads.that.can.be.deleted.will.blink .
Select a bank . Protected banks (p . 38) are indicated as
“
P r t
” and cannot be selected .
Pads that can be deleted will blink .
3. Press.the.pad.that.you.want.to.delete .
The selected pad will change from blinking to lit .
You can select multiple pads .
4. Press.the.[DEL].button.to.delete.the.sample .
NOTE
Never turn off the power before the deletion is complete . When the deletion is complete, the “
d A L
” indication in the
display will disappear .