Radio Shack 43-3546 - Manual (Page 8)

Us
in
g Yo
ur
P
ho
ne
8
A
DJUSTING THE
E
ARPIECE
V
OLUME
The handset earpiece volume settings (Low, Medium and
High) can only be adjusted during a call. Press
VOL
repeatedly to select Low, Medium and High. When you
hang up, the phone keeps the last volume setting selected.
R
INGER
M
UTE
The END key can be used to temporarily mute the ringer
tone. When the handset is off the base and the phone is
ringing, press the
END key and the ringer tone will be
temporarily silenced. The ringer tone will return to normal
starting with the next incoming call.
T ONE D IALING S WITCH - OVER
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing). If you
need to enter tone dialing digits, you can switch-over to tone
dialing during the call. For example, entering your bank
account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once
your call connects, press
/TONE . Enter the desired
number. These digits will be sent as tone dialing. This
special number can be stored in a memory location. This is
referred to as Chain Dialing. Once the call ends, the tone
mode is cancelled and pulse dialing mode resumes.
Ô
S
ELECTING A
D
IFFERENT
C
HANNEL
If you encounter interference while using your phone, you
can manually change the phone’s channel for clear
operation. This function works only when the phone is in
use. Press
CH . The TALK/BATT LOW flashes, indicating the
phone is changing to another channel.
P
AGE
To locate the handset (while it’s off the base), press PAGE
on the base. The handset beeps for 60 seconds. Paging is
cancelled when pressing any key on the handset, or return
the handset to the base.
Ô
F LASH AND C ALL W AITING
If you have “Call waiting” service and a call waiting tone
sounds while you are on a call, press
FLASH to accept the
waiting call. There is a short pause. Then you will hear the
new caller. To return to the original caller, press
FLASH
again.
Ô
M
EMORY
D
IALING
Storing a Phone Number in Memory
Your cordless phone has one speed dial memory location
and 10 additional memory locations for storing important
telephone numbers. You can store your most frequent
dialed number in the one-touch speed dial location.
1. Remove the handset from the base.
Ô
NOTES
Ô
Tone Dialing Switch-over
The tone feature only applies when
the dial mode is set to pulse.
Page
You can cancel paging by pressing
PAGE on the base.
Flash and Call Waiting
You must subscribe through your
local telephone company to receive
Call Waiting Service.
43-3556.fm 8 ページ ２００４年１月２８日 水曜日 午前１０時５２分