Regalo Safety Gate - Manual (Page 9)

R E M O V I N G Y O U R G AT E F R O M TH E WA L L
C A R E A N D M A I N T E N A N C E
To r em ov e y ou gate from the wall begin by turning the Adjustment Wheels clockwise until the flat
plastic ends of the Threaded Spindle Rods come out from the Wall Cups. This will free your gate from
the w all .
Periodically check the gate for sign of damage, wear or for missing components.
Do not use if any part is missing, worn or damaged components.
Check the gate regularly to make sure all the hardware and mountings are tightened.
Do not use abrasive cleaners or bleach.
Clean it by sponging with warm water and mild detergent.
(9)
Important: Keep these
instructions for future
reference
Gate Instructions
Instructions for Gate Extension
1. Assemble the gate per the gate instructions.
2. Choose the side of the gate to be extended and remove the top and bottom Adjustment Wheel Spindles.
3. Assemble the gate and extension as illustrated.
4. Reposition the gate and fit in accordance with the gate fitting instructions.