Radio Shack CT-502 - Manual (Page 30)

30
• If the call screening function is turned on, your phone
sounds a different alert tone or number of vibrations. See
“Using Call Screening” on Page 34.
Follow these steps to change the alert type.
1. Press .
2. Repeatedly press or until Ring Or Vib
Sel flashes, then press to enter the change mode.
The current setting (such as Ring Only ) appears.
3. Repeatedly press or until you see the setting
you want to use, then press to select that setting.
4. Press to exit the functions menu.
Using the Quick-Set Method — To quickly set your phone
to ring or vibrate to alert you of an incoming call, press
. The phone displays Ring Only (for ring as usual) or
Vibrate Only (for vibration alert).
Note: Using the quick-set method to set your phone to ring
(
Ring Only ) automatically disables the silent alert if it is set.
Turning the Keypad Tones Off/On
Your phone is preset to sound a tone each time you press a
key; however, you can turn off the keypad tones. Follow
these steps to turn the keypad tones off or on.
1. Press .
2. Repeatedly press or until Keypad Tone On
or Off flashes.
FCN NAME
MENU
#
STO
#
STO
END
FCN
8 TUV
FCN NAME
MENU
#
17-1111.fm Page 30 Wednesday, July 21, 1999 2:23 PM