Copying a rhythm saved to the rhythm [disk] button – Roland AT15 User Manual
Page 38
38
Using the Rhythm Performance
■
Copying a Rhythm Saved to the Rhythm [Disk]
Button
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] button to select “Disk
Rhythm.”
3.
Press the [Rec] button.
4.
Use the Menu [
] and [
] button to select “Copy
Rhythm.”
5.
Press the [Rec] button.
6.
Press the Value [-] and [+] buttons to select the copy-source
rhythm.
7.
Press the [Rec] button.
8.
Press the Value [-] and [+] buttons to select the copy-
destination rhythm.
To cancel the procedure, press the [Display/Exit] button.
9.
Press the [Rec] button.
While the Rhythm is being copied into internal memory, the following
screen will be displayed.
NOTE
You cannot select “Copy
Rhythm” from the Utility
menu unless a rhythm is
stored to the Rhythm
[Disk] button.
AT-15_e.book 38 ページ ２００５年１月２１日 金曜日 午後８時１４分