Adjusting the metronome volume, Changing the sound of the metronome – Roland AT15 User Manual
Page 79
79
Settings for the Composer
Adjusting the Metronome
Volume
You can adjust the volume of the metronome.
1.
Press the [Utility] button.
2.
Using the Menu [
] and [
] buttons, select
“Metronome.”
3.
Press the [Rec] button.
4.
Using the Menu [
] and [
] buttons, select
“Metronome Vol.” (Metronome Volume).
fig.09-03
5.
Press the Value [-] and [+] buttons to select the
desired volume level (1–10).
Increasing the value will raise the volume of the metro-
nome.
To return to the basic screen, press the [Utility] button.
Changing the Sound of the
Metronome
You can choose one of 4 different sounds for the metronome.
1.
Press the [Utility] button.
2.
Using the Menu [
] and [
] buttons, select
“Metronome.”
3.
Press the [Rec] button.
4.
Press the Menu [
] and [
] buttons to select
“Metronome Sound.”
fig.09-04
5.
Press the Value [-] and [+] buttons to select the
type of sound for the metronome.
To return to the basic screen, press the [Utility] button.
➔
This setting remains stored in memory even while power is
turned off.
Setting
Descriptions
CLICK&BELL
Conventional metronome sound
ELECTRONIC
Electronic metronome sound
VOICE ENG.
Human voice (English)
VOICE JPN.
Human voice (Japanese)
AT-15_e.book 79 ページ ２００５年１月２１日 金曜日 午後８時１４分