Ryobi ELL0001 - Manual (Page 15)

14 15
WARNING:
To avoid serious personal injury, always
remove the batteries from the tool when
cleaning or performing any maintenance.
GENERAL MAINTENANCE
n Before initial use, wipe AIRgrip ™ vacuum
base with a damp cloth to remove any
residue.
n Store the laser level indoors.
n When not in use, the laser level and base
should be kept in the protective case.
n Keep the laser level free of dust and liquids.
Use a damp cloth and mild soap to clean
the outside casing. Avoid using solvents
when cleaning plastic parts. Most plastics
are susceptible to damage from various
types of commercial solvents and may be
damaged by their use.
MAINTENANCE
WARNING:
Do not at any time let brake fluids, gaso-
line, petroleum-based products, penetrat-
ing oils, etc., come in contact with plastic
parts. Chemicals can damage, weaken or
destroy plastic which may result in serious
personal injury.
n To clean the laser lens, if needed, use
ONLY a soft cloth or cotton swab moist-
ened with glass cleaner.
n Check the batteries regularly to avoid de-
terioration. Remove the batteries from the
laser level if it is not going to be used for
an extended time.
n Do not disassemble the laser level. This
could cause exposure to hazardous laser
radiation.
n Do not attempt to change any part of the
laser lens.
ALWAYS BE AWARE of the loca-
tion where the laser light is emit-
ted when using the level. ALWAYS
MAKE SURE that any bystanders in
the vicinity of use are made aware
of the dangers of looking directly
into the laser beam.