Roland Recorder CD-2e - Manual (Page 4)

4
Creating a Copy of a Song at a New Playback Speed
You can change the playback speed of a song on an SD memory card or a CD, and save the new
version of the song on the SD memory card.
* In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included).
1
Insert the media that contains the song you want to edit.
* The song with the new playback speed will be created on the SD memory card. If you want to edit a
song that’s on a CD, you’ll need to provide both the CD and the SD memory card.
2
Select the song whose speed you want to change.
3
Press the [MENU] button to access the menu screen, and choose “Change
Speed?”
fig.menu-key01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Change Speed?”
Press the [ENTER] button to confirm your choice.
4
Use the [+] [-] buttons to change the playback speed setting, and press the
[ENTER] button.
If you’ve changed the playback speed as described in “Slowing Down or Speeding Up
Playback” (Owner’s Manual; Page 67), that value will be applied.
fig.menu-key02-e.eps
5
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.divide-mssg-e.eps
The display will show “Processing...” and the operation will be performed. When processing
has been completed, you’re returned to the audio source screen, and the copy of the song
at the new playback speed will be added at the end of the SD memory card.
* If you want to audition the song, press the [ (Play)]
button.
Media and song number of the song to be edited
Progress indication
● It will take some time for this operation to take place. The maximum time required for processing will be
approximately 1.5 times the playback time of the song. (This will depend on the playback speed setting.)
For example, if you’re editing a four-minute song at a playback speed of 50 (half speed), processing will
take approximately six minutes.
● The SD memory card must have enough free space to contain the newly created song. For example, if
you’re editing a four-minute song at a playback speed of 50 (half speed), you won’t be able to execute
the operation unless the SD memory card has at least six minutes of recording time remaining.
● This operation cannot be executed if the length of the song after editing would be less than four seconds.
● Key, pitch, and Center Cancel settings are not reflected in the resulting song copy.
● This operation cannot be performed if the SD memory card’s write protect switch (Owner’s Manual;
Page 25) is in the “LOCK” position.
Important
CD-2e_l_ver110_e.fm 4 ページ ２００８年５月２８日 水曜日 午後２時３３分