Roland Recorder CD-2e - Manual (Page 6)

6
Additional Functionality for the Metronome ☞
Owner’s Manual; Page 98
You can now set the tempo of the metronome by pressing the [ ] button at the desired interval
(Tap Tempo function). In addition, you can now adjust the volume of the metronome.
1
Follow the procedure described in steps 1–2 on Page 98 in the Owner’s
Manual.
2
Setting the tempo.
fig.menu-metro03-e.eps
Press the [EXIT] button to return to the menu screen.
Use the [ ] [ ] buttons to choose “Tempo.”
Press the [ENTER] button to confirm your choice.
Set the metronome tempo.
There are two ways to set the tempo.
• Use the [+] [-] buttons to change the tempo value
• Specify the desired tempo by tapping it out using the
[ ] button
The tempo value will be changed to reflect the timing you’ve
used in pressing the [ ] button.
3
Adjust the volume.
fig.menu-metro05-e.eps
Press the [EXIT] button to return to the menu screen.
Use the [ ] [ ] buttons to choose “Level.”
Press the [ENTER] button to confirm your choice.
Use the [+] [-] buttons to adjust the metronome volume as
desired.
Value Explanation
=20–120 (factory setting)–250
Specifies the number of quarter-notes in one minute.
Decreasing this value will make the tempo slower. Increasing this
value will make the tempo faster.
Value Explanation
-6–0 (factory setting)–6 The higher the value, the louder the volume.
CD-2e_l_ver110_e.fm 6 ページ ２００８年５月２８日 水曜日 午後２時３３分