Roland KC-60 - Manual (Page 6)

6
Panel Descriptions
Control Panel
fig.01
Jack Panel
fig.01
CHANNEL CONTROL
1. CH 1 knob / CH 1 Input Jacks
In addition to a 1/4” phone jack, this channel is equipped
with a balanced XLR connector, useful for connecting
microphones.
This accepts input levels ranging from mic input (-50 dBu) to
line level from sound modules and other equipment (-20 dBu).
2. CH 2 and CH 3 knobs / CH 2 and CH 3
Input Jacks
Use these for connecting keyboards, sound modules, and
other devices.
They accept line level input (-20 dBu).
MASTER CONTROL
These adjust the tone and volume level for the built-in
speakers or for headphones.
3. LOW Knob
This adjusts the level of the bass range.
4. HIGH Knob
This adjusts the level of the treble range.
5. VOLUME Knob
This adjusts the total volume level of the unit’s internal
speaker. The SUBWOOFER OUT output is also changed.
When connecting headphones, adjust the headphone volume
level.
* The VOLUME knob do not affect the line outs.
6. PHONES Jack
This is for connecting headphones. The unit’s speakers are
deactivated when headphones are plugged in.
Also, no signals are output from SUBWOOFER OUT (p. 7).
* Always be sure to lower the VOLUME knob to 0 whenever
connecting and disconnecting headphones.
* Although the PHONES jack accepts stereo plugs, the audio
output is mono.
2 7 8 1 5 4 3 6
1 2 9 10 11