Razor E500S - Manual (Page 6)

5
REPAIR AND MAINTENANCE
q Battery Care and Disposal
Do not store the battery in temperatures above 75° or below -10° F.
CONTAINS SEALED LEAD BATTERY. BATTERY MUST BE RECYCLED.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally sound manner. Do not dispose of a lead-acid battery in a fire. The battery may explode
or leak. Do not dispose of a lead-acid battery in your regular household trash. The incineration, land filling
or mixing of sealed lead-acid batteries with household trash is prohibited by law in most areas. Return
exhausted batteries to a federal or state approved lead-acid battery recycler or a local seller of automotive
batteries. If you live in Florida or Minnesota, it is prohibited by law to throw away lead-acid batteries in the
municipal waste stream.
q Charger
The transformer/charger supplied with the scooter should be regularly examined for damage to the cord,
plug, enclosure and other parts, and, in the event of such damage, the scooter must not be charged until it
has been repaired or replaced.
Use ONLY with the recommended charger.
q Replacement Parts
The most frequently requested replacement parts (wheels, tires, tubes, batteries and chargers) are
available for purchase at some Razor retail partners or online at www.razorama.com. For other parts
contact an authorized Razor repair center.
q Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Send e-mail to [email protected] or call 866-467-2967 for the center nearest you.
WARNING:
If a battery leak develops, avoid
contact with the leaking acid
and place the damaged battery
in a plastic bag. Refer to the
disposal instructions at left. If
acid comes into contact with
skin or eyes, flush with cool
water for at least 15 minutes
and contact a physician.
q Front Tire Replacement
1 Loosen front axle by
attaching 10/15 mm wrenches
to both axle nuts and loosening
counter-clockwise.
2 Remove wheel and replace
tire. To reinstall wheel, reverse
these steps.
1 Remove chain guard with
Phillips Screwdriver.
q Rear Tire/Chain Replacement
2 Loosen rear axle by attach-
ing wrenches to both axle nuts
and loosening counter-clock-
wise. Pull chain off sprocket and
remove wheel from frame.
3 Remove wheel and replace
tire or chain. To reinstall wheel,
reverse these steps.