RCA ProV714 - Manual (Page 11)

5
Powering the Camcorder from
an AC Outlet
1 Slide the battery compartment door release
and open the battery compartment door as
shown.
2 Insert the DC cable connecting plate as
shown, then push it in completely.
3 Pass the DC cable through the battery
compartment notch. Close the door by
pressing it firmly in the center until it clicks.
4 Plug the DC cable into the DC OUT jack on
the AC adapter.
Insert the AC adapter’s AC plug into a wall
outlet. The POWER indicator will light.
Caution This AC adapter/battery charger is
specially designed for use with the Camcorder, and
should not be used as a power supply for other
camcorders.
Battery
compartment
door release
Connecting plate
Notch
Lock
Release the lock when
removing the connecting plate.
DC cable
To wall outlet
DC OUT jack
Using an Optional Plug Adapter
An optional plug adapter may be required in some
countries.
AC 110-240V
Optional AC
Plug Adapter
•
Plug the adapter/charger’s plug into the AC
plug adapter.
•
Plug the AC plug adapter into an AC outlet.
Powering the Camcorder
Preparation
p01~10 4/8/97, 10:08 AM 5