Auto/manual focus – RCA ProV714 User Manual

Page 22

Advertising
background image

16

REC

STOP

FF

PLAY

REW

BATTERY DEW/CLOG

N

LAMP OFF

AUTO

FOCUS

F

Useful Features for Camera Recording

Auto/Manual Focus

Auto Focus

The Camcorder’s Auto Focus feature is designed to
focus on most types of subjects. In Auto Focus mode,
the Camcorder automatically focuses on whatever is
in the center of the scene. Therefore, always keep the
subject in the center of the monitor screen.

Notes

If no subject is in the center of the monitor screen,
the focus area will expand and the Camcorder will
focus on the subject nearest the center.

If no subject is displayed on the monitor screen,
the Camcorder will automatically zoom out until
some subject comes into the monitor screen.

Auto focus may not be able to focus correctly in the
situations shown in the chart. In such situations, set
the Camcorder to Manual Focus mode and focus
manually.

Using the Manual Focus

1

Press the Power Zoom T button to set the
zoom power to the maximum.

2

Press the FOCUS Far or FOCUS Near
button for 1 second to set Manual Focus
mode. Then press the buttons to focus on
the subject.

3

Press the Power Zoom buttons to frame the
subject as you desire.

Lack of contrast, e.g.

snow scene.

Subject is too dark.

Fast-moving subject.

Background is too bright.

Subject is being shot

through a dirty or wet

window.

Two subjects at different

distances overlap in the

same scene.

Subjects at different

distances appear in the

center of the scene at the

same time.

Subject has fine, repeated

patterns.

Subject has vertical or

horizontal stripes.

Light reflects off the

subject.

To Go Back to Auto Focus

Press the AUTO FOCUS button to set the
Camcorder to Auto Focus mode.

Notes

While recording in Manual Focus mode, you may
not be able to focus correctly if the subject is within
approximately 5 feet (1.5 m) of the Camcorder. In
such a case, shift the zoom control toward wide
angle, and then try focusing again.

If you focus on a subject without first setting the
zoom power to the maximum, the subject may go
out of focus when you zoom farther in on it later.

If the lens is dirty or fogged, you may not be able to
obtain correct focus.

AUTO FOCUS button

1

,

3

2

Far button

Near button

p11~33

4/8/97, 10:09 AM

16

Advertising
This manual is related to the following products: