Roland ATELIER AT-300 - Manual (Page 34)

32
Selecting and Playing Sounds
Turning on the Vintage Organ
1.
Press the Vintage Organ [On/Off] button so its indicator is
lit.
Each time you press the button, the indicator will alternate between ON (lit)
and OFF.
The Vintage organ screen appears.
fig.01-24.eps
The screen will show value for the harmonic bars.
When a harmonic bar is pulled out all the way (8), the volume is loudest.
When it is pushed in all the way (0), there will be no sound.
Modifying the Sound
1.
Press H-Bar Part [Upper] or [Lower] buttons to select a part
for which the harmonic bars are available.
2.
Slide the harmonic bars that you want to hear.
You can layer the sound of multiple harmonic bars.
Playing a Vintage Organ Voice
NOTE
Glide and sustain effects are
not applied to the Vintage
Organ voice.
The Vintage Organ screen will
be displayed for several
seconds, then it will close
automatically.
AT-100-300_e.book 32 ページ ２００８年５月７日 水曜日 午後３時３３分