Changing the depth of the reverb – Roland ATELIER AT-300 User Manual
Page 82
80
Adding Various Effects to a Voice
You can make independent settings for each Part.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to select “Reverb.”
3.
Press the [Rec] button.
4.
Press the Menu [
] and [
] buttons to select “Depth.”
fig.11-05
5.
Press the Menu [
] and [
] buttons to select the part
whose reverb depth you wish to adjust.
6.
Press the Value [-] and [+] buttons to adjust the setting.
For the three Parts of the Accomp, Rhythm and A.Bass, you have the option of selecting
the “AUTO” setting. Parts for which “AUTO” is selected will be set to the Reverb Depth
that is most suitable for the Rhythm currently selected.
To return to the basic screen, press the [Utility] button.
Changing the Depth of the Reverb
Part
Accomp
(Automatic Accompaniment except Bass)
, Rhythm, Drums,
A.Bass
(Bass part of Automatic Accompaniment)
, Pedal, Lower, Solo, Vintage
Settings
Descriptions
0 – 10
AUTO
(Accomp, Rhythm, A.Bass)
Increasing the value will increase the amount
of reverb effect.
AT-100-300_e.book 80 ページ ２００８年５月７日 水曜日 午後３時３３分