Reebok 51549 - Manual (Page 11)

11
HH01300
AR
AR
GB
Ao
Ao
GB (2)
GB
25 26
AN
AI
27
AI
Wipe off any grease that may be on the Channel (AN) before
attaching the Sticker.The bottom of the Height Sticker (AI)
lines up with the bottom edge of the Inner Channel (AN).
AN
AN
Ao
Ao
Ao
AN
Squeeze the Trigger while
inserting the Inner Channel (AN).
Slide the Inner Channel (AN) up to the
10’ mark and release the Trigger so it
clicks into place.
Insert the slotted end first.
AN
28
Remove the Inner Channel (AN) that is
packaged inside the Outer Tube (AO)
before attaching the Handle (AR).
AP
GE
GH
29
Ao
(1)
(1)
GH
Ge
WARNING
Do not overtighten the Cap Nut. If the end of the Bolt
breaks through the plastic cap, call our Customer Service
Department at the number on Page One. Exposed threads
on the end of the Bolt may cause serious injuries such as
those listed on Page One.
1/2” Wrenches