Reebok 51549 - Manual (Page 5)


POLE SECTION IDENTIFICATION
Identify the pole sections before beginning assembly. Failure to assemble
the pole sections correctly may result in severe personal injury or property
damage as described on Page One.
ONCE THE POLE SECTIONS HAVE BEEN SEATED, THEY
CANNOT BE SEPARATED.
TP
MP
Top Pole:
Four holes at the
top of the pole and
one small hole at
the bottom.
Middle Pole:
One slot at the top of the pole,
four holes in the middle and
one small hole at the bottom.
Warning Sticker.
BP
Bottom Pole:
One slot at the top of the pole, two
holes near the top, two holes at
the bottom and a bent edge at the
bottom. Shortest pole.
GK GF
MP
GL AQ HF
Large holes
2 1
Small
holes
GL
GK
HF
PA
(2)
GF
(2)
(2)
(2)
(1)
1005748
HH01300
9/16” Wrenches
Tighten all Nuts
securely now.
MP
TP
PA
Align the hole in the Top Pole with the slot in the Middle
Pole and slide the Top Pole over the Middle Pole.
Do not jam the poles together until instructed.
The Screw will spin freely once installed.
Insert a 1/4” x 3/4” Screw (PA) through the small
hole in the Top Pole and into the Middle Pole.
Note: There are two screw holes at the
bottom of the pole. The correct hole will
be slightly larger and slightly higher up
on the pole.