Runco CINEMAWALL CW-61 - Manual (Page 62)

Specifications
52 Runco CinemaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
7.3
Computer/Video Signal
Compatibility The CinemaWall can display video signals from a variety of computer sources via its
RGB-HD and DVI inputs.
Table 7-2 lists the signal types that are compatible with the CinemaWall, and indicates
which of those are VESA standards.
Table 7-2. Computer/Video Signal Compatibility Chart
Signal Type
Mode
(Dots x Lines)
Vertical
Frequency (Hz)
Horizontal
Frequency (kHz)
Sync Polarity
Horiz. Vert.
IBM 640x400 70.10 31.50 neg neg
IBM
640x480
59.90 31.50 neg neg
MAC 66.70 35.00 Sync on Green
VESA 72.80 37.90 neg neg
VESA 75.00 37.50 neg neg
VESA 85.00 43.30 neg neg
IBM 100.40 51.10 neg neg
IBM 120.40 61.30 neg neg
IBM
720x400
70.10 31.50 neg neg
VESA 85.10 37.90 neg pos
VESA
800x600
56.25 35.20 pos pos
VESA 60.30 37.90 pos pos
VESA 72.20 48.10 pos pos
VESA 75.00 46.90 pos pos
VESA 85.10 53.70 pos pos
IBM 99.80 63.00 pos pos
IBM 120.00 75.70 pos pos
MAC 832x624 74.60 49.70 Sync on Green
IBM 848x480 60.00 31.00 pos pos
IBM 852x480 60.00 31.70 neg neg
VESA
1024x768
60.00 48.40 neg neg
SGI 60.00 49.70 -- --
VESA 70.10 56.50 neg neg
MAC 74.90 60.20 Sync on Green
VESA 75.00 60.00 pos pos
VESA 85.00 68.70 pos pos
IBM 100.00 80.50 neg neg
IBM 1280x768 56.20 45.10 pos pos
SGI 1280x1024 60.00 63.90 -- --
IBM 1280x1024 60.00 64.00 pos pos
Notes:
1. The CinemaWall may not be able to display images from notebook computers in simultaneous
(CRT/LCD) mode. Should this occur, switch the notebook computer to “CRT only” mode. If you
are unsure how to do this, refer to your notebook computer’s user manual.
2. All modes other than the native resolution (1024x768 for the CW-42HD or 1365x768 for the
CW-50XA and CW-61) are scaled up or down to that resolution.