ROTEL RDV-1045 - Manual (Page 13)

13 English
• Specify the track number using the number
buttons when the disc is stopped. Refer to the
“Remote Control Numeric Buttons” section
of this manual.
• Specify the track number using PREVIOUS
{ u or NEXT } y when the disc is
stopped, and then press / (PLAY) r .
• Press RETURN [ to go back to the upper
layer during PBC playback of a VCD or
SVCD.
When a disc is stopped
Total playback time Disc type Total
number of
tracks
• When the PBC function is activated, the
display below appears after the display
above is displayed for a short time.
CD
When a disc is playing
Elapsed playback time Track number
When a disc is stopped
Total playback time Disc type Total
number of
tracks MP3/WMA/ASF/MPEG1/
MPEG2 disc
When a disc is playing
Elapsed playback time Track
number
Group
number
• When a WMA disc is played back, “WMA”
is displayed instead of “MP3”.
• When an ASF/MPEG1/MPEG2 disc isplayed
back, no disc type indicator is displayed.
When a disc is stopped
Track
number
Disc type Group number
• When a WMA disc is loaded, “WMA” is
displayed instead of “MP3” in the upper
indicator and the lower display.
• When an ASF disc is loaded; “MP3” disap-
pears in the upper indicator, and “ASF” is
displayed instead of “MP3” in the lower
display.
JPEG disc
When a disc is played back or stopped
File number Group number
Changing the Display Window
Information
While a disc is playing press DISPLAY 2 . Each
time the button is pressed the information in
the display changes.
�����������������������������������������������������
����������������������������������������������
������������������������������������������������������
���������
����������������
��������������������������������������
���������
����������������
������������������������������������
���������������������
����������������
������������������������������������
������
����������������
����������������������������������������������
��������������
������������
�����������������
������������������������������������
�����
Other Disc Play Controls
Pausing Playback
To pause playback when a disc is playing press
, (PAUSE) k .
Fast Forward/Reverse Search
While a disc is playing press [ ] ;l .
Each time these buttons are pressed the forward
or reverse speed increases. Press
/ (PLAY) r
to resume normal speed playback.
Or, while is disc is playing press and hold
{ } NEXT/PREVIOUS y / u . Fast forward
or reverse searching will continue as long as
the button is held.
The speeds of the fast forward/reverse searching
will vary, depending on the type of disc being
played. Also note that during fast forward/re-
verse searching the sound may be intermittant
or turned off.
Slow Motion Playback
–(moving images only)
While disc play is caused press [ ] ;l .
Each time one of these buttons is presssed the
speed of the slow forward or reverse play will
increase. Press
, (PAUSE) k to pause slow
motion play. Or press / (PLAY) r to resume
normal speed playback.
No sound is produced during Slow Motion
Playback. During Reverse Slow Motion Play-
back the picture motion will not be smooth.
When playing VCD, SVCD or DVD VR discs,
Slow Motion Playback will work only in the
forward direction.