ROTEL RDV-1045 - Manual (Page 2)

2 RDV-1045 DVD Player
Rotel products are designed to comply with international directives on the Restriction
of Hazardous Substances (RoHS) in electrical and electronic equipment and the
disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie
bin symbol indicates compliance and that the products must be appropriately
recycled or processed in accordance with these directives.
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electric shock, be sure that the apparatus shall
not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture,
or a foreign object gets into the enclosure, immediately disconnect the power cord from the
wall. Take the unit to a qualified service person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this manual so you
can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Follow
all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
You must allow 10 cm or 4 inches of unobstructed clear-
ance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface
that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there
must be ventilation of the cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage specified on the
rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an exact
equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding
and/or polarization provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to
heat, or damaged in any way. Pay particular attention to the power cord at the plug and where
it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left unused for a
long period of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified
service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Please use Class 2 Wiring when connecting the speaker terminals of the
unit to ensure proper insulation and minimize the risk of electrical shock.
IMPORTANT
FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2.
DANGER: Visible laser radiation
when open and interlock failed or bypassed. Avoid
direct exposure to beam.
3.
CAUTION: Do not open the top cover. There are
no user serviceable parts inside the player; leave all
servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock,
fires, etc.:
1. Do not remove screws,
covers or cabinet.
2. Do not expose the unit to rain
or moisture.
3. Do not touch the power cord
or plug with wet hands.
This symbol means that this unit is double insulated. An
earth connection is not required.
Place the unit on a fixed, level surface strong enough
to support its weight. Do not place it on a moveable
cart that could tip over.
V CD GR PG PL TR TITLE VR DVD WMA CHAP PRGM RND GR ALL TIMER MP3 3D PHONICBONUS B.S.P PROGRESSIVE A - B
�������
����
����������
������� ��������������������������������
�������
������
�������
������
�������
������
������� ������