Rayming BTH-808 User Manual

Page 6

Advertising
background image

www.rayming.com

BTH808_Users Guide_121504.doc



2.4 WHEN TO CHARGE
GETTING STARTED
Before you can use your headset, you need to charge its self-contained battery for a minimum of two hours.

RECHARGING
When the red indicator light on the headset flashes and you hear high tones through the headset speaker, the
headset battery needs to be recharged.

BATTERY USEAGE
A fully charged headset battery provides approximately:
Talk time – 4.5 hours
Standby time – up to 200 hours


2.5 PAIRING THE HEADSET WITH A PHONE

You must first pair the headset with your phone by adding it to a list of paired devices within the phone. The two
devices can then recognize each other when they connect. Once you have paired your headset with your phone.
You do not need to pair it again, or if you choose to use it with another device.
The BTH-808 can store pairing information for up to eight different Bluetooth devices.

TO PAIR THE HEADSET WITH A BLUETOOTH ENABLED PHONE
1. Prepare your phone according it’s User Manual instructions for paring Bluetooth devices.
2. Press the multifunction button on the BTH-808 for about 10 seconds until the blue and red indicator lights on

the headset flash alternately. The headset is now ready for pairing.

3. Continue according to the instructions in the phone’s user documentation.

NOTE: The headset Passkey is 1234.


2.6 WEARING ON THE HEADSET

1. Make sure the ear hook forms an angle of 90°.
2. Place the ear hook behind your ear.
4. Make sure the microphone is pointing forward towards your mouth.


2.7 HOW TO TURN ON/OFF HEADSET

To turn the headset on

Press and hold the Multifunction button until the headset indicator flashes the

BLUE

LED four times.


To turn the headset off
Press and hold the Multifunction button until the headset LED indicator flashes the

RED

LED four times .



2.8 MAKING AND ANSWERING CALLS
Phone functionality is still available when the headset is powered On and Paired with your phone. You can make
and answer calls using the buttons on the headset. or the keys on the phone, as usual.




Advertising