Rival S16RB - Manual (Page 5)

-5-
4. Preheat the skillet with the LID on for 10 -15 minutes.
NOTE: Due to manufacturing process, during initial use of this appliance, some
slight smoke and/or odor may be detected. This is normal with many heating
appliances and will not recur after a few uses.
5. The STEAM VENT allows steam to escape while cooking with the LID in place.
CAUTION: Escaping steam is HOT! Be careful when removing or lifting LID.
Oven mitts are required when handling the LID or SKILLET PAN.
6. When cooking is complete turn TEMPERATURE CONTROL DIAL to “OFF”.
7. Prior to removing pan from HEATING BASE, turn TEMPERATURE CONTROL
DIAL to “OFF” and remove plug from wall outlet.
8. The SKILLET PAN can be removed from the HEATING BASE and placed in the
oven for baking or roasting. The LID must be removed when using the SKILLET
PAN in the oven.
9. The SKILLET PAN can be used as a serving piece.
When placing the SKILLET PAN on a countertop,
kitchen table or other surface, place a hot plate
or trivet that measures at least 3/8" high under
the pan to prevent burning or discoloration of
the surface.
HOW TO USE YOUR ELECTRIC SKILLET (CONT.)