Specifications, Default settings, Standard equipment – RIDGID SR-60 User Manual

Page 48: Optional equipment, Frequencies table

Advertising
background image

46

www.seektech.com

Ridge Tool Company



Elyria, Ohio



U.S.A

SeekTech SR-60

Specifications

• Weight w/ batteries .......5.4 lbs. (2.5 kg)

• Weight w/o batteries .....4.7 lbs. (2.1 kg)

Dimensions

• Length ...........................14”

(35.56 cm)

• Width

............................ 7” (17.78 cm)

• Height

........................... 31” (78.74 cm)

Power Source

• 4 C-size batteries, 1.5V Alkaline

(ANSI/NEDA 14A, IEC LR14) or 1.2V NiMH
or NiCad rechargeable batteries

• Power Rating: 6V, 550mA

• Signal

Strength

Non-linear in function. 2000 is 10x
higher than 1000, 3000 is 10x higher
then 2000, etc.

Operating Environment

• Temperature -4°F to 122°F (-20°C to 50°C)

• Humidity

5% to 95% RH

• Storage Temperature -4°F to 140°F (-20°C to

60°C)

Default Settings

• Depth units = Feet & inches,

• Volume = 2 (two settings above mute)

• Backlight = Auto

• Frequency = 33 kHz (Line Trace Mode)

Standard Equipment

Item

Cat. #

• SR-60

Locator

22163

• Markers and Mast Holder

12543

• Stereo Sound-Pointer Speakers 30143

• Operator’s

Manual

• 4 C-cell batteries (Alkaline)

• Training Video (DVD)

Optional Equipment

• Additional Sonde Markers

12543

• ST-33Q

Transmitter

26168

• ST-510

Transmitter

21903

• Inductive Clamp (4.75”)

20973

• Remote

Sonde

16728

• Float

Sonde

19783

Frequencies Table

The following table shows the frequencies available in the SR-60. The default frequencies shown are in Checked-
Active status as shipped. Optional frequencies may be added as described on page 33.















Exact Frequency Values (SR-60)

Sonde

16 Hz
512 Hz
640 Hz
850 Hz
8 kHz
16 kHz
33 kHz

16.0
512.0
640.0
850.0
8192
16384
32768

Passive Line
Trace

50 Hz
50 Hz

5th

50 Hz

9th

60 Hz
60 Hz

5th

60 Hz

9th

50
250
540
60
300
540

Active Line
Trace

European

128 Hz

1 kHz
8 kHz

33 kHz
93 kHz

93 kHz-B

128
1024
8192
32768
93,696.0
93,622.9

Active Line Trace ........ 128Hz, 1 kHz, 8kHz,

33kHz, 200 kHz, 262
kHz; 93kHz (EU only)


Power Line Trace ........ 60Hz (9th), <4kHz

Radio Frequencies: .... Low (4-15kHz),

High (>15kHz)

OmniSeek

<4 kHz+4-15 kHz +
15-35 kHz

Default Frequencies:

Sonde ........................... 16 Hz, 512Hz, 640 Hz,
850 Hz, 8 kHz, 16 kHz, 33 kHz
SimulTrace................... 512 Hz + 33 kHz
Passive Line Trace
...... 50 Hz, 50 Hz (5th), 50
Hz (9th) 60 Hz, 60Hz (5th), 60Hz (9

th

), 100 Hz,

120 Hz


Optional Frequencies:

The SeekTech SR-60 is protected under U.S. Patents
7009399, 7136765, and other Patents Pending.

Advertising