Radio Shack ET-1105 - Manual (Page 6)

6
PREPARATION
SELECTING A LOCATION
You can place the phone on a desk top
or table, or mount it on a standard wall
plate. Select a location that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
The base’s location affects the phone’s
range. If you have a choice of several lo-
cations, try each to see which provides
the best performance.
Caution: The supplied AC adapter was
designed specifically for your ET-1105.
Use only the supplied adapter.
ATTACHING THE
HANDSET’S
ANTENNA
Screw the antenna into the
hole at the top of the hand-
set.
PLACING THE BASE ON A
DESK TOP
Follow these steps to place the base on
a desk, shelf, or table.
1. Remove the bracket by holding in
both tabs and gently pulling out the
wide end of the bracket.
2. Plug one end of the supplied long
modular cord into the phone jack on
the back of the base.
Tabs
43-1105.fm Page 6 Monday, August 30, 1999 1:57 PM