Roberts Radio R737 - Manual (Page 6)

Memory tuning
You may store up to 25 stations in memory. 10 on FM, 10 on medium wave
and 5 on long wave.
Tune in the desired station as previously described.
Press the memory button (8) to open the memory a flashing 'M' will appear
in the display. While the 'M' is flashing press one of the preset buttons on
which you want to store the station. Press the memory button (8) to store
the station and close the memory. Repeat this procedure for the other 4
presets.
Note memory tuning can only be carried out while the 'M' in the display is
flashing.
On FM and MW a further 5 stations can be preset.
To set preset memory 6.
Press the memory button (8) to open the memory a flashing 'M' will appear
in the display. While the 'M' is flashing press the +5 button (20) and then
press preset button 1. Press the memory button (8) to store the station and
close the memory. The display will show 6 in the top right hand corner.
To set preset memory 7.
Press the memory button (8) to open the memory a flashing 'M' will appear
in the display. While the 'M' is flashing press the +5 button (20) and then
press preset button 2. Press the memory button (8) to store the station and
close the memory. The display will show 7 in the top right hand corner.
Repeat this procedure for presets 8-10.
To recall a station from preset memory
First select the waveband then press the required preset button. Presets 6-
10 are accessed by pressing the +5 button followed by the required preset
button. e.g. to recall preset memory 8 press the +5 button followed by preset
button 3. Preset memories 6-10 are only available on FM and MW.
MHz
FM
M
5