Roland KR107 - Manual (Page 32)

32
Chapter 1 Performance
Chapter 1
❍
Making Detailed Settings for Advanced 3D
1.
Press the [Ambience/Reverb] button and watch the indicator light up.
2.
Touch <Advanced 3D> to display the Advanced 3D screen.
3.
Press the [Option] button.
fig.d-adv3dopt.eps_60
Touch to switch the screens.
4.
Touch for the parameter being set to select the value.
You can also change the value with the dial.
With “Part,” you can touch the icon and then select the value.
5.
When you press the [Exit] button, you return to the Advanced 3D screen.
Parameter Display Explanation
Part
All Parts
The effect is applied to all tones played with the
keyboard (the lower tone, upper tone, and layer
tone).
Layer Parts
The effect is applied only to the layer part.
When not using a layer performance (p. 26), the
Advanced 3D effect is not applied to the keyboard
performance, even if <Keyboard> on the Advance
3D screen is set to On.
Mode
Auto
This selects settings that are adjusted for use with
headphones when headphones are connected.
When no headphones are connected, settings
adjusted for speakers are selected.
Speaker
Settings adjusted for listening to sounds through
speakers are selected.
Headphone
Settings adjusted for listening to sounds through
headphones are selected.
Depth 1–4
Changes the apparent depth of the sound. The
effect is applied more as the value is increased.
Width 1–128 Changes the breadth of the sound.
KR107_e.book 32 ページ ２００５年８月３日 水曜日 午前９時３６分