RedMax BCZ2600SU - Manual (Page 26)

26 
11. Optional blade usage
[ BCZ2600S, BCZ2600SU ]
Change to the debris guard which is suitable for
the metal blade. (OPT3)
130~174 in-lbs
TIGHTENING TORQUE:
(14.7~19.6 N.m.)
(1)Guard Ass’y: 6489-24000 (6)Screw: 0277-10412
(2)Guard: 6489-24110 (7)Plate: 6489-24120
(3)Plate Comp.: 6489-24200 (8)Washer: 01601-20513
(4)Plate: 6489-24210 (9)Bolt: 01252-30516
(5)Blade: 6489-24220
[ BCZ2600S, BCZ2600SU ]
Change the loop handle to the J-handle for safe
operation. (OPT4)
(1) Bracket: 3583-14101
(2) J-handle: 6367-14200
■ STARTING THE ENGINE
Please refer 5.For safe operation (P.8~9),
8.Operation (P.17).
• The product is equipped with a centrifugal clutch
mechanism, so the cutting attachment begins to
rotate as soon as the engine is started by putting
the throttle into the start position. When starting
the engine, place the product onto the ground in
a flat clear area and hold it firmly in place so as
to ensure that neither the cutting part nor the
throttle come into contact with any obstacle
when the engine starts. (OPT5)
■ CUTTING METHOD
a) Use the front left side cutting.
b) Guide the blade from your right to left with it
tilted slightly to your left. (OPT6)
c) When mowing a wide area, start working from
your left end to avoid interference of cut grass.
d) The blade may be seized by weeds if the engine
WARNING
IMPORTANT
IMPORTANT
OPT4
BCZ2600S
BCZ2600SU
OPT6
OPT5
OPT3
BCZ2600S
BCZ2600SU