Raleigh 2008 - Manual (Page 20)

20
E. Tires and Tubes
1. Tires
Bicycle tires are available in many designs and
specifications, ranging from general-purpose designs to tires
designed to perform best under very specific weather or
terrain conditions. If, once you’ve gained experience with
your new bike, you feel that a different tire might better suit
your riding needs, your dealer can help you select the most
appropriate design.
The size, pressure rating, and on some high-performance
tires the specific recommended use, are marked on the
sidewall of the tire (see fig. 16). The part of this information
which is most important to you is Tire Pressure.
!
WARNING: Never inflate a tire beyond the maximum
pressure marked on the tire’s sidewall. Exceeding the
recommended maximum pressure may blow the tire off the
rim, which could cause damage to the bike and injury to the
rider and bystanders.
The best and safest way to inflate
a bicycle tire to the correct pressure
is with a bicycle pump which has a
built-in pressure gauge.
!
WARNING: There is a safety risk
in using gas station air hoses or other
air compressors. They are not made
for bicycle tires. They move a large
volume of air very rapidly, and will
raise the pressure in your tire very
rapidly, which could cause the tube
to explode.
Tire pressure is given either as maximum pressure or as a
pressure range. How a tire performs under different terrain or
weather conditions depends largely on tire pressure. Inflating
the tire to near its maximum recommended pressure gives the
lowest rolling resistance; but also produces the harshest ride.
High pressures work best on smooth, dry pavement.
Very low pressures, at the bottom of the recommended
pressure range, give the best performance on smooth, slick
terrain such as hard-packed clay, and on deep, loose surfaces
such as deep, dry sand.
Tire pressure that is too low for your weight and the riding
conditions can cause a puncture of the tube by allowing the
tire to deform sufficiently to pinch the inner tube between the
rim and the riding surface, or damage the wheel rim, making
the wheel unsafe.
!
CAUTION: Pencil type automotive tire gauges can be
inaccurate and should not be relied upon for consistent,
accurate pressure readings. Instead, use a high quality
dial gauge.
Ask your dealer to recommend the best tire pressure for
the kind of riding you will most often do, and have the dealer
inflate your tires to that pressure. Then, check inflation as
described in Section 1.C so you’ll know how correctly inflated
tires should look and feel. Some tires may need to be brought
up to pressure every week or two.
Some special high-performance tires have unidirectional
treads: their tread pattern is designed to work better in
one direction than in the other. The sidewall marking of a
unidirectional tire will have an arrow showing the correct
rotation direction. If your bike has unidirectional tires, be sure
that they are mounted to rotate in the correct direction.