Runco CL-610 User Manual
Cl-610 series
Advertising
Table of contents
Document Outline
- TWO YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Mounting the CL-610
- 3.5 Connections to the CL-610
- Connector Panel Access
- Connecting Source Components to the CL-610
- RS-232 Controller Connection
- Connecting 12-volt Trigger Output to External Theater Equipment
- Connecting to AC Power
- 3.6 Turning On the Power
- 3.7 Changing the OSD Language
- 3.8 Adjusting the Picture Orientation
- 3.9 Zoom and Focus Adjustments
- 3.10 Installing and Adjusting the CineWide Anamorphic Lens
- 4. Operation
- 4.1 Selecting Video Memory
- 4.2 Selecting an Aspect Ratio
- 4.3 Selecting An Input Source
- 4.4 Using Picture-In-Picture and Picture-By-Picture (PIP/PBP)
- 4.5 Turning Off the Power
- 4.6 Using the On-Screen Menus
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
- Appendix A. Personalizing the ISF Splash Screen on the CL-610