Runco CL-610 - Manual (Page 69)

Runco CL-610 Series Owner’s Operating Manual 57
PRE
L
IMINAR
Y
7.1
CL-610 Specifications Table 7-1 lists the CL-610 specifications.
7. Specifications
Table 7-1. CL-610 Specifications
Projector Type: Digital Light Processing (DLP), Single-Chip DMD
Native Resolution: 1280 x 720 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
Video Standards: NTSC, PAL, SECAM
DTV Compatibility: 480p, 576p, 720p, 1080i
Scan Frequency: Horizontal: 15 - 80 kHz
Vertical: 50 - 100 Hz
Picture Size (16:9 Screen): Recommended Width: 72 in. (1.83 m) to 96 in. (2.44 m)
Capable of screen widths between 48 in. (1.22 m) and 200 in.
(5.08 m)
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal and Vertical Lens
Shift: None; electronic image shift via OSD controls
Video Inputs: (1) Composite Video, (1) S-Video, (1) RGB/Component Video
(5xBNC), (1) RCA Component Video, (1) HDMI
Control Options: - Discrete IR remote
- Built-in keypad
- Serial commands via RS-232
RS-232 Communication
Parameters: 9600, 38400 or 115200 bps, no parity, 8 data bits, 1 stop bit,
no flow control
12V Output: Max. 0.25 Amps, active when projector is turned on;
Tip = +12V; Sleeve = Ground