Roland eBand JS-8 - Manual (Page 29)

27
Convenient Functions
D
eu
tsc
h
Fra
nça
is
Ita
lia
no
Po
rtu
gu
ês
Es
pa
ño
l
N
ed
erl
an
ds
En
gli
sh
COMP parameter list
LIMITER parameter list
Parameter
SUSTAIN This sets the sustain for the sound.
ATTACK This sets the attack (onset) of the sound.
LEVEL This sets the volume level of the effect.
Parameter
THRESHOLD
When the input signal level exceeds the
level set here, limiting will be applied.
RELEASE
Adjusts the amount of time that the limit-
ing effect is applied after the signal exceeds
the threshold level.
LEVEL This sets the volume level of the effect.
OCTAVE parameter list
Parameter
OCTAVE LEVEL
This sets the volume level of the effect
sound.
DI RECT LEVEL
This sets the volume level of the direct
sound.
AC.PROCESSOR parameter list
Parameter
TYPE
Selects the modeling type.
SMALL
This is the sound of a small-bodied
acoustic guitar.
MEDIUM
This is a standard, unadorned
acoustic guitar sound.
BRIGHT
This is a bright acoustic guitar
sound.
POWER
This is a powerful acoustic guitar
sound.
BASS Adjusts the low-end volume.
MIDDLE Adjusts the midrange volume.
TREBLE Adjusts the high-end volume.
Parameter
TYPE
Selects the number of stages that the phaser
effect uses.
4 STAGE
This is a four-phase effect. A
light phaser effect is ob-
tained.
8 STAGE
This is an eight-phase effect.
This is the most common
phaser effect.
12 STAGE
This is a twelve-phase ef-
fect. A deep phase effect is
obtained.
BI-PH.
This is the phaser with two
phase shift circuits con-
nected in series.
RATE This sets the speed of the effect.
DEPTH This sets the richness of the effect.
RESONANCE This sets the intensity of the effect.
PHASER parameter list
FLANGER parameter list
TREMOLO parameter list
Parameter
RATE This sets the speed of the effect.
DEPTH This sets the richness of the effect.
MANUAL
Adjusts the modulation frequency of the
flanger effect.
RESONANCE This sets the intensity of the effect.
Parameter
RATE This sets the speed of the effect.
DEPTH This sets the richness of the effect.
WAVE SHAPE
Adjusts changes in volume level. A higher
value will steepen wave’s shape.
About the RATE Parameter in PHASER,
FLANGER, and TREMOLO Eff ect
When set to BPM, the value of the RATE parameter is set
according to the value of the “EFFECT TEMPO” (p. 30) speci-
fied for each patch. This makes it easier to achieve effect
sound settings that match the tempo of the song.