Rackmount Solutions Enterprise Series - Manual (Page 5)

4
Press and release the ON/OFF/TEST button after one beep to turn the unit ON or
OFF (see section 4)
On-Line On-Battery Buck Boost
The On-Line/On-Battery/Boost and Buck (green) LED illuminates in a steady
state when the UPS is on and supplying AC power to the load. The LED blinks
and the audible alarm sounds, when supplying battery power to the load.
The Fault (red) LED illuminates when the UPS has detected an internal fault. (see
section 5)
The Overload (yellow) LED illuminates when the loads connected to the UPS
exceeds the UPS power rating. (see section 5)
The Weak/Bad Battery (red) LED illuminates when the UPS has detected that the
batteries are Weak/Bad. Battery replacement might be required. (see section 5)
The Site Wiring Fault (red) LED illuminates when the UPS detects a improperly
wired AC outlet. (see section 5)
F RONT P ANEL
English
E n te rp ris e E 3 2 0 0
SWF
On-Line/On-Battery/Boost/Buck LED
Fault LED
Overload LED
Weak/Bad Battery LED
Site Wiring Fault LED
On/Off/Test Switch
CON TROLS AND INDICATORS