Ryobi P220 - Manual (Page 9)

9
FEATURES
KNOW YOUR HAMMER DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SWITCH
Your hammer drill has a conveniently located trigger
switch.
THREE-SPEED GEAR TRAIN
This hammer drill has a three-speed gear train. A slide
switch is located on top of the drill to select either
LOW (1),
HIGH (2) or SUPER-HIGH (3) speed.
REVERSIBLE
This hammer drill allows you to reverse the bit rotation. You
can control the direction with the lever located on the top
of the tool.
ADJUSTABLE TORQUE CLUTCH
The hammer drill is equipped with an adjustable torque
clutch for driving different types of screws into different
materials.
DEPTH GAUGE ROD
A depth gauge rod is installed on the auxiliary handle assembly
to assist you in controlling the depth of drilled holes.
AUXILIARY HANDLE ASSEMBLY
An auxiliary handle is installed on the hammer drill. For ease
of operation, you may use the handle with either the left hand
or the right hand.
HAMMER MODE OPERATION
This tool features a hammer speed of 0-35,200 Blows Per
Minute (BPM) in SUPER-HIGH (3) speed. Blows Per Minute
is the number of impacts per minute when operating in
Hammer Mode.
BIT STORAGE
When not in use, you can place the bits provided with your
hammer drill in the storage area located on the bottom of
the drill.
ERGONOMIC DESIGN
The design of the hammer drill provides for easy handling.
It is designed for comfort and ease of grasp when operating
in different positions and at different angles.