Radio Shack VG-2 Guard - Manual (Page 19)

19
Mounting the Power Cord Clips
You can use the supplied power cord clips to route the
power cord out of the way. Follow these steps to mount
the power cord clips.
1. Use a damp cloth to thoroughly clean the locations
on the dashboard where you want to mount the
clips. Let the dashboard dry completely.
Note: The clip’s adhesive might not stick to a sur-
face treated with vinyl cleaner or protectant.
2. Peel off each clip’s paper backing, then press the
clip onto the selected mounting location.
22-1676.fm Page 19 Friday, August 6, 1999 10:38 AM