Runco CR-32HD - Manual (Page 17)

17
Connecting the Power
Cord and Switching the
Display On / Off
4 5
0 100
1 2 3
6
TIMER
OFF
INPUT
1
7 8 9
OFF ON
INPUT
2
INPUT
3
INPUT
4
SOURCE
1. Connect the power cord for your display to the power input on the back of your
display.
2. Plug the power cord for the display into a nearby outlet.
3. Press the POWER (
) button on the remote control or the POWER button on the
display panel.
4. To switch your display off, press the POWER ( ) button on the remote control or
the POWER button on the display panel.
Basic Operations
Selecting a Source
1. Press the MENU button on the remote control.
2. Press the
▲▼ buttons to select Source and then press the ENTER or ► button.
3. Select the appropriate Source by pressing the ▲▼ buttons and then press the
ENTER or ► button.
• You can select TV, Input 1, Input 2, Input 3, Input 4, DVI or RGB.
4. Press the MENU button to return to the previous menu.
OR
You can also select the Source directly from the remote control using discrete
source buttons.
0 100
RGB
HD
TV DVI
SLEEP MEMORY DISPLAY
TIMER
OFF
INPUT
1
INPUT
2
INPUT
3
INPUT
4
CUST
ISF
NT
ISF
DAY
SOURCE
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
> TV
Input 1
Input 2
Input 3
Input 4
DVI
RGB