Runco CR-32HD - Manual (Page 20)

20
Equalizer
1. Press the ▲▼ buttons to select Equalizer and then press the ENTER or ► button.
2. Press the ▲▼ buttons to select Standard, Music, Film, Speech and Custom on
the remote control or the ( ) to toggle between the selection.
3. Press the ▲▼ buttons to select Custom and then press the ENTER or ► button.
Press the ◄ ► buttons to select the frequency. The frequency range will be
selected as the following order: 100 ➞ 300 ➞ 1K ➞ 3K ➞ 10K
Press the ▲▼ buttons to make the adjustments.
Selecting Audio
1. Press the MENU button on the remote control.
2. Press the
▲▼ buttons to select Audio and then press the ENTER or ► button.
3. Press the ▲▼ buttons to select Balance, Equalizer or Surround.
4. Press the MENU button to return to the previous menu.
Selecting Channel 1. Press the MENU button on the remote control.
2. Press the
▲▼ buttons to select Channel and then press the ENTER or ► button.
3. Press the ▲▼ buttons to select TV/CATV, Auto Tuning, Add/Erase,
Fine Tune or Favorite Channel.
4. Press the MENU button to return to the previous menu.
Balance
1. Adjust the Sound Balance with
the
◄ ► buttons.
Surround
TV / CATV
Basic Operations
Note:
When Surround is selected,
the Equalizer feature is
automatically “grayed out.”
S-MODE
(For the CR-32HD only)
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
Audio
Balance
Equalizer
Surround
0
Audio
Balance
Equalizer
Surround
Standard
Music
Film
Speech
> Custom 100 300 1K 3K 10K
Audio
Balance
Equalizer
Surround
On
> Off
Audio
Balance
Equalizer
Surround
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
Channel
TV / CATV
Auto Tuning
Add / Erase
Fine Tune
Favorite Channel
> TV
CATV
Channel
TV / CATV
Auto Tuning
Add / Erase
Fine Tune
Favorite Channel