Radio Shack Pro 84 - Manual (Page 45)

45 Beyond the Basics
disappears. You can also press 0-9 to select the
bank.
Z Press E to store the frequency into the blank
channel.
If you enter a frequency that has already been
stored elsewhere, the scanner sounds an error tone
and displays the channel that was duplicated.
If you entered the frequency by mistake, press
./CLR. To enter the frequency anyway, press E to
accept.
The scanner moves to program mode after you
stored the frequency.
search skip memory
You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in channels.
Notes:
• You cannot skip frequencies during WX service
search.
• Search skip frequencies are shared by service
search, direct entry search, chain search, and
signal stalker modes. If skip frequencies are set
in certain mode, the frequencies are also
skipped in other search modes and Signal
Stalker mode.