RTS DKP-8 - Manual (Page 10)

Menu List for DKP-8, DKP-12, and KP-12 Keypanels
4
PAGE 1-4 See “Top Level Menu, Page (1-4)”
on page 24. Changes setup pages on the keypanel or any connected expansion panels.
TGL LISN See “Top Level Menu, TGL LISN
(Toggle Listen ON/OFF)” on page 25. Lets you activate/deactivate a key’s listen assignment independently of talk. Only available on push
button keypanels.
MENU MODE
See “Menu Mode”
on page 27. In the top level menu, tap SELECT on MENUS to turn on the MENU indicator. Then, turn SELECT to view the following
menus. Tap the SELECT control to select a menu to view items in that menu.
AUTODIAL Menu Stores autodial numbers for use by a phone or autodial key.
KEY ASGN Menu
AUTODIAL Assigns a key to dial a specific autodial number that was entered using the AUTODIAL menu,
above.
AUTOFUNC Assigns any of the available auto functions (also called special functions) to a key.
CLEAR Clears talk/listen assignments. (Does not clear key options, see “CLR OPT” in KEY OPT menu.
COPY Copies one key’s assignment to another key
LISTS
ICOM Accesses another intercom system for key assignment (trunked intercoms only).
PL Accesses party line list for key assignment
GRP Accesses group list for key assignment
IFB Accesses IFB list for key assignment.
ISO Accesses ISO list for key assignment.
P-P Accesses point-to-point list for key assignment.
RLY Accesses the intercom system’s list of relays for key assignment.
SPCL Accesses special lists for key assignment.
UPL Accesses UPL resources for key assignment.
LOCAL I/O Assigns relays or open collector outputs to keys. (Appears only on KP-12 with GPI module
options.)
PHONE Assigns an all-purpose phone key for use with TIF Telephone Interface.
REDIAL Assigns a redial key for use with a TIF Telephone Interface.
KEY OPT Menu
BTN LOCK Locks intercom keys in the ON or OFF position, or unlocks them.
CHIME Adds a chime tone to an intercom key for incoming call announcement.
CLR OPT Clears all options from a key.
COPY Copies one key’s options to another key.
EXCLUSIVE Assigns keys for use with the exclusive key option.
GROUP 1-4 Assigns several keys for simultaneous activation when a group master key is activated.
LATCHING Turns the latching feature ON or OFF for selected keys.
SOLO Assigns a key that, while activated, will temporarily turn OFF all other active keys.
SERVICE Menu
DIMMER Adjusts brightness of displays.
FOOT SW Enables or Disables the use of the foot switch. (Only available if the GPI board is installed)
KEY TYPE Select push-button or lever style keys, whichever the keypanel has.
LOCK Locks out access to all SERVICE menu items, and locks HDST / SPKR / PRGM selection.
MIC CNTL Selects microphone input from either a headset, panel mic or from the EXT MIC IN connector.
MIC COMP Adjusts the MIC compression of the audio source.
MIC GAIN Adjusts the mic gain.
MOD ASGN Defines which keys occupy which positions on the keypanel and expansion panels.
MUTE LVL Adjusts the amount of listen muting when talk keys are activated.
OPTO-ISO Assign opto-isolator inputs to actuate keys, pages, etc. (KP-12 with GPI module only.) See
“Menus, SERVICE, OPTO-ISO (KP-12 with GPI Module Only)” on page 45.
OUT CTRL Assigns whether you listen to audio through either HEADSET or SPEAKER
RESET Clears all settings that are saved locally at the keypanel.
SAVE CFG Saves all local settings.