Roland BR-800 User Manual

Page 72

Advertising
background image

74

Using Insert Effects

BASS SIM (Bass Simulator)

Simulation of the characteristics of particular bass
components such as pickups and different bass bodies
allows you to switch among a number of different bass
types all while using a single bass.

SLOW GEAR

This produces a volume-swell effect (“violin-like” sound).

DEFRETTER

This simulates a fretless bass guitar.

Parameter/
Range

Explanation

TYPE

Selects the type of the bass simulator.

PAS

ACT

Changes from a passive type pickup tone to
an active type pickup tone.

ACT

PAS

Changes from an active type pickup tone to
a passive type pickup tone.

SGL

HUM

Changes from a single-coil pickup tone to a
humbucking pickup tone.

HUM

SGL

Changes from a humbucking pickup tone
to a single-coil pickup tone.

SLD

HLW

Changes a solid body bass tone to a hollow
body bass tone with the body resonance
added.

SGL

ACO

Changes a single-coil pickup tone to an
acoustic bass tone.

HUM

ACO

Changes a humbucking pickup tone to an
acoustic bass tone.

LOW

-50–+50

Adjusts the tone for the low frequency
range.

HIGH

-50–+50

Adjusts the tone for the high frequency
range

BODY

0–100

Adjusts the way the body sounds when
Type is set to SLD

HLW, SGL

ACO, or

HUM

ACO.

The body sound increases as the value is
raised; reducing the value produces a tone
similar to that from a piezo pickup.

LEVEL

0–100

Adjusts the volume.

Parameter/
Range

Explanation

SENS (Sensitivity)

0–100

Adjusts the sensitivity of the slow gear.
When it is set to a lower value, the effect of
the slow gear can be obtained only with a
stronger picking, while no effect is ob-
tained with a weaker picking.
When the value is set higher, the effect is
obtained even with a weak picking.

RISE TIME

0–100

Adjusts the time needed for the volume to
reach its maximum from the moment you
begin picking.

Parameter/
Range

Explanation

TONE

-50–+50

Adjusts the amount of blurring between
the notes.

SENS (Sensitivity)

0–100

This controls the input sensitivity of the de-
fretter.

ATTACK

0–100

Adjusts the attack of the picking sound.

E.LEVEL (Effect Level)

0–100

Adjust the volume of the defretter sound.

D.LEVEL (DIRECT Level)

0–100

Adjust the volume of the direct sound.

BR800_e.book 74 ページ 2010年3月2日 火曜日 午後6時40分

Advertising